Installation manual

NetBotz Rack Sensor Pod 150 Installation Manual2
Additional options
The following options are available for the NetBotz 150. Some options may not be supported by each
rack or room monitor to which the NetBotz 150 can be connected. See the options listed in the
installation instructions included with your rack or room monitor. For more information about any of the
options, contact your APC representative or the distributor from whom you purchased your APC
product.
• Temperature Sensor (AP9335T)
• Temperature/Humidity Sensor (AP9335TH)
• NetBotz Spot Fluid Sensor (NBES0301)
• NetBotz Smoke Sensor (NBES0307)
• NetBotz Vibration Sensor (NBES0306)
• NetBotz Door Switch Sensor for APC Racks (NBES0303)
• NetBotz Door Switch Sensor for Rooms or Third Party Racks (NBES0302)
• NetBotz Dry Contact Cable (NBES0304)
• NetBotz 0-5 V Sensor Cable (NBES0305)
• Power Supply 100-230 VAC/24 VDC (AP9505i)
InfraStruXure-certified
This product is certified for use in APC InfraStruXure
®
systems.