Installation manual

NetBotz Rack Sensor Pod 150 Installation Manual6
Rack-mount installation
1. Choose a location for the NetBotz 150 in the front or rear of the rack. The
NetBotz 150 occupies one U-space. A notched hole or a number on the
vertical rail of the rack denotes the middle of a U-space.
Note: To avoid equipment damage, use only the hardware
provided when installing the brackets.
2. Install the brackets on each end of the
NetBotz 150.
3. Secure the NetBotz 150 to the rack, using
cage nuts and screws (provided with the
rack).