Specifications

Rack Access PX-HID Installation 1
Preliminary Information
Overview
Use the NetBotz
®
Rack Access PX-HID to
monitor and control access to your NetShelter
®
SX
enclosure electronically.
Inventory
Rack Access PX-HID.
Rack Access PX-HID Lock.
Bracket kit.
Door switch kit.
Quantity Item
1 Rack Access PX-HID (AP9361)
2 HID 26-bit standard access cards
1 RS232 configuration cable (APC part
number 940-0103)
1 6-ft (1.8-m) IEC-320-C13 to IEC-320-C14
power cord (APC part number 960-0007)
1 6-ft (1.8-m) NEMA 5-15P to IEC-C13
power cord (APC part number 960-0079)
The Rack Access PX-HID ships with
two individually packaged Rack
Access PX-HID locks.
Quantity Item
1 Lock with an embedded access card reader
and an 8-ft (2.4-m) cable
1Cam with screw
1Cam washer
2 Screws
1Key
Quantity Item
2 Mounting brackets
4 Black 8–32 × 1/4-in Phillips flathead
screws
1 Power cord retainer
1 8-in black hook-and-loop fastening strap
2 8-in black wire ties
Quantity Item
2 Door switch magnets
2 Door switches
2 13.75-ft. (4.19-m) RJ-45 door switch
cables
4 M3 hex nuts
6 6–32 × 5/16 Roloc™ screws
20 4-in wire ties
10 0.75-in square adhesive cable-tie holders
4 2.5 × 0.5-in dual adhesive tape