Specifications

26 Rack Access PX-HID Installation
5. Enter your User Name and Password (both
apc, for administrators only) and press the
ENTER key.
6. From the Control Console menu, select
System, then Tools, then File Transfer, then
XMODEM.
7. The system will prompt you with Perform
transfer with XMODEM -CRC? Type
Yes and press
ENTER.
8. The system will then prompt you to choose a
transfer rate and to change your terminal
settings to match the transfer rate. Press
ENTER
to set the Rack Access PX-HID to accept the
download.
9. In the terminal program, send the file using the
XMODEM protocol. Upon completion of the
transfer, the console will prompt you to restore
the baud rate to normal.
The Rack Access PX-HID will reboot when the
transfer is complete.
Do not interrupt the transfer.