Specifications

10 Rack Access PX-HID Installation
d. Place the plastic cover over the door switch
and snap the cover into place. Route the
cable out the opening in the cover.
e. Plug the door switch cables into the ports
marked Front Door Switch and Rear
Door Switch on the rear panel of the Rack
Access PX-HID.
3. Connect the door switch magnet to the
enclosure door.
Front door
a. Attach the door switch magnet to the
enclosure door, using two screws
(provided).
b. Cover the door switch magnet with the
plastic cover, and snap the cover into place.
Rear door
Attach the rear door switch magnet to the
enclosure door, using the nuts (provided).
a. Slide the door switch magnet over the
existing pegs and bolt it into place, using
two nuts.
b. Cover the door switch magnet with the
plastic cover, and snap the cover into place.
aem0097a
Do not place the plastic cover
over the door switch magnet until
the door switch has been installed
on the enclosure door.
aem0098a