Installation guide

8
NetBotz Rack Access Pod 170 Installation Guide
Configure and Monitor Sensors
Once your system is installed and receiving power, configure sensors and begin
monitoring your system using the software interface for the appliance.
See your appliance installation and quick configuration manual for
system installation details and for instructions on accessing the
software interface of the appliance.
Upgrade the Rack Access Pod
Firmware upgrades for Rack Access Pods are included with firmware upgrades
for NetBotz appliances. When you upgrade firmware for the appliance to which
the Rack Access Pod is connected, the Rack Access Pod firmware will be
updated automatically, if required.
Note: The Rack Access Pod Identifier # LED shows 88 during a
firmware upgrade. During the upgrade, data from sensors connected
to the Rack Access Pod will be invalid.
For more information on firmware upgrades, see your appliance
user’s guide. For details on how to access your appliance user’s
guide, see “Additional documentation” on page 1.
Clean the Rack Access Pod
To clean the device, gently wipe surfaces with a clean, dry cloth.