User`s guide

89NetBotz Appliance User’s Guide
The following controls and data appear in the Advanced tab:
Field Description
Send debug messages to syslog When checked, debug messages are forwarded to the syslog host
specified in the Configure Log Settings window.
For more information see “Log” on page 76.
Use default SMS settings Check to use the default SMS values for your SMS-capable modem. To
use custom settings, uncheck this checkbox, check Use protocol
descriptor unit, and enter Character set and Initialization
commands.
Use protocol descriptor unit (PDU) Specifies whether the appliance should use Protocol Descriptor Unit
(PDU) mode or mode when communicating with the modem to send
the SMS message. PDU mode is preferred because it is more versatile
than text mode. Some modems do not support both modes.
Character set The character set used when communicating with the modem to send
the SMS message.
Initialization commands The initialization string used for the modem that sends SMS messages.