User`s guide

86NetBotz Appliance User’s Guide
Proxy
Use the Proxy icon to allow the appliance to use an HTTP, Socks V4, or V5 Proxy Server. When
configured, the appliance uses the proxy server for all e-mail and HTTP Post communications, allowing
these communications to cross the firewall. These settings apply only to communications from the
appliance.
To use an HTTP, Socks V4, or V5 Proxy Server, double-click the Proxy icon to open the Proxy Settings
window. This window contains an HTTP tab and a SOCKS tab, each of which contains the following
fields:
Enter your information and click OK to save your changes.
Region
Use the Region icon to specify the region in which the appliance is used and to configure the appliance
clock to report time using a 12- or 24-hour clock.
Note: Region settings affect only the date and time stamp displayed in image captures and
the format of sensor readings and dates or times specified in alert notifications. The regional
format of dates, times, and sensor readings displayed in Advanced View are determined by
the region settings reported by the operating system on which Advanced View is running.
Double-click the Region icon to open the Region Configuration window.
1. To change the Region settings, type the new values in the appropriate fields.
2. Click OK. A prompt to reboot the appliance appears.
3. Click Reboot. This may take a few minutes during which time Advanced View will be
unavailable.
Field Description
Hostname The host name or IP address of the proxy server the appliance uses for
e-mail, HTTP Posts, and other outbound communications.
Port The IP port number to connect to on the proxy server.
User name Enter a User name to allow access through the server.
Password/Verify password Enter a Password to allow access through the server.