User`s guide

72NetBotz Appliance User’s Guide
Using an extended storage system
Note: You cannot select the USB Drive option if no USB port is connected to your appliance.
To configure your appliance to use an Extended Storage System:
1. Click the External Storage icon to open the External Storage window.
2. Click Add... to open the External Storage Configuration window.
3. Select USB Drive and click Next.
4. The Select Operation pane appears and displays the following selections:
– Use Extended Storage: Configure the appliance to use the Extended Storage System without
formatting the file system first. This option is used if the Extended Storage System connected
to your appliance is formatted and contains camera and sensor data.
– Format and use Extended Storage: Formats the Extended Storage System file system and
configures the appliance to use the Extended Storage System.
5. Select an operation and click OK.
– If you select Use Extended Storage, a confirmation message advises you that the appliance
must restart to complete the task. Click Finish to restart the appliance. When the restart is
complete, all Extended Storage System functionality is available.
– If you select Format and use Extended Storage, a confirmation message advises you that
formatting the extended storage device will destroy any data stored on the device and that
formatting can take ten or more minutes to complete, after which the appliance must restart.
Click Finish. Once the Extended Storage System is formatted, your appliance restarts. When
the restart is complete, all External Storage functionality is available.