User`s guide

62NetBotz Appliance User’s Guide
Sensors
Select a device from the Sensor Pods window and click Sensors. Select a sensor from the Sensors list to
display thresholds defined for that sensor in the Thresholds list.
To modify a sensor:
1. Select a sensor from the Sensors list.
2. Click Modify to open the Modify Sensor window.
3. Type a label in the Label field. This label can be up to 64 characters in length, and identifies the
sensor in the Sensor Data pane, Advanced View interfaces, and in alert notifications.
4. From the Sensor Value History drop-down list, select the amount of time that data reported by
this sensor is stored on the appliance. The amount of data available on the appliance affects the
maximum amount of data that can be graphed.
For more information, see “Viewing Graphs” on page 27.
5. Click OK.
Thresholds. All sensors have a default threshold that is generated automatically by Advanced View.
This threshold provides the typical threshold for the specific sensor type. Thresholds can be customized.
Sensor thresholds are explained in detail in “Advanced View: Defining Thresholds” on
page 95.
To enable or modify a sensor threshold:
1. Select a sensor from the Sensor list.
2. Select the threshold to enable or modify from the Thresholds list.
3. Click Edit....
4. The Edit Threshold window appears.
– To enable the threshold, check Enabled.
– To change threshold settings, use the controls in the Edit Threshold window.
5. Click OK.
The controls available in the Edit Threshold window are determined by the type of
threshold that you are creating or editing. For detailed instructions on how to create or
edit thresholds, see “Advanced View: Defining Thresholds” on page 95.