User`s guide

57NetBotz Appliance User’s Guide
3. Type the appropriate values in the fields.
4. By default, all Periodic Reports are generated according to the Interval you specify. You can
specify that a Periodic Report be active only during specific time ranges. To configure Advanced
Scheduling:
a. Click Advanced Scheduling....
b. By default, all time periods in the schedule are Enabled. To disable the Periodic Report for
a period of time, click-and-drag over the time range, and click Disable. To enable the
Periodic Report for a period of time, click-and-drag over the time range, and click Enable.
c. Click OK to save the schedule and return to the Edit E-mail Periodic Report window.
5. Click OK.
Graph priority Limit the amount of sensor data included with the periodic report.
Select one of the following settings:
High: Only sensor data associated with physical sensors that are
integrated with or connected to the appliance is included in the
report. Sensor data associated with remote devices is not included
in the report.
Medium: Sensor data associated with physical sensors and with
Advanced Data sensor sets from remote devices is included in the
report. Data not included in the report is data associated with
remote devices that is not grouped in an Advanced Data sensor
set.
Low: Sensor data from all sensors is included in the report.
Graph available
history
The maximum time period for which data is graphed.
E-mail addresses The addresses to which periodic e-mail reports are delivered.
Field Description