User`s guide

56NetBotz Appliance User’s Guide
Periodic Reports
Configure your appliance to generate sensor reading reports and deliver them on a user-specified
schedule. These reports contain readings for all sensors connected to your appliance. Double-click the
Periodic Reports icon to open the Periodic Reports Configuration window. This window displays a
table with the following reporting methods:
• Periodic E-mail Report
• Periodic FTP Report
• Periodic HTTP Report
If a periodic report is enabled and configured, you can click Test Reports to immediately generate and
deliver reports to all enabled report recipients.
Configuring periodic e-mail reports
1. Select Periodic E-mail Report from the Periodic Reports Configuration window and click
Edit.
2. The Edit E-mail Periodic Report window opens and contains the following fields:
Field Description
Enabled Enable periodic e-mail reporting.
Include camera
pictures
Include image captures by camera pods connected to the appliance
in the e-mailed report. Image captures included with periodic
reports are 640x480 resolution, regardless of appliance camera
settings.
Include maps Include maps in the e-mailed report.
Include graphs Include graphs of the sensor readings in the e-mailed report.
Interval The frequency in minutes with which e-mail reports are generated.
Sensor priority Limit the amount of sensor data included with the periodic report.
Select one of the following settings:
High: Only sensor data associated with physical sensors that are
integrated with or connected to the appliance are included in the
report. Sensor data associated with remote devices is not included
in the report.
Medium: Sensor data associated with physical sensors and with
Advanced Data sensor sets from remote devices is included in the
report. Data not included in the report is data associated with
remote devices that is not grouped in an Advanced Data sensor
set.
Low: Sensor data from all sensors is included in the report.