User`s guide

54NetBotz Appliance User’s Guide
• Switch Relay actions cause the relay device to switch from its current state (On or Off) to its
alternate state. Once switched, the relay remains in the new state until another switch action
changes its state again. To create a Switch Relay action:
a. Select Switch Relay and click OK.
b. The Add Switch Relay Output window features the following fields and controls:
c. Enter the appropriate values for the Switch Relay action.
d. Click OK to add this output action to the list of available output actions.
Field Description
Relay output type The name of the custom output action definition.
Once defined, the Output Type label appears only in
the Relay Output Type selection list when
specifying output control external port settings.
Default relay output
label
The label used, by default, for any new output types
added using this custom output definition.
To modify a label, see “Output control sensor
settings” on page 55.
On value The text that describes the relay in its on state.
Off value The text that describes the relay in its off state.
Switch initial state The state (On or Off) of the relay at the time the
output action is assigned.
This is also the state to which the switch is set when
the appliance is turned on, regardless of what state
the switch was in when the appliance was turned off.