User`s guide

52NetBotz Appliance User’s Guide
The following output control actions are available when the output control device is wired
between the NC (Normally Closed) and COM terminals on the appliance:
2. In the Port Label field, type a label to identify the device connected to the output control device
port.
3. Click OK.
Action Description
None No output action is associated with this port.
One-Second Button
(NC)
When activated, a normally closed (NC) relay is switched to a
closed state for 1 second, and then switched back to open.
One-Second Button
(NO)
When activated, a normally open (NO) relay is switched to an
open state for 1 second, and then switched back to closed.
Switch (NC) When activated, a normally closed (NC) relay is switched to a
closed state.
Switch (NO) When activated, a normally open (NO) relay is switched to an
open state.
Ten-Second Button
(NC)
When activated, a normally closed (NC) relay is switched to a
closed state for 10 seconds, and then switched back to open.
Ten-Second Button
(NO)
When activated, a normally open (NO) relay is switched to an
open state for 10 seconds, and then switched back to closed.
Reboot Button When activated, power to the outlet is interrupted for 10 seconds,
and then restored.