User`s guide

50NetBotz Appliance User’s Guide
Output Control
Note: The Output Control icon appears only when a supported Sealevel I/O device or APC
Switched Rack PDU has been connected to the appliance and configured using the Serial
Devices icon.
For more information on configuring serial devices, see “Serial Devices” on page 87. For
more information about supported Sealevel I/O devices and APC Switched Rack PDUs and
how they connect to the appliance, see the installation and quick configuration manual
included with your appliance.
To configure a supported output control device, double-click the Output Control icon. A list of devices
connected to your appliance appears.
Output control label settings
Select a device from the Output Control Configuration window and click Settings.
1. Type a label for this device in the Label field.
2. Select options for Unplugged alert severity and Unplugged alert profile, and click OK.