User`s guide

18NetBotz Appliance User’s Guide
Locking a Navigation pane selection
You can lock the Navigation pane so that only a specific device is selected. Once the Navigation pane is
locked, Advanced View automatically starts with the pane in the locked state.
To lock the pane to a specific device:
1. Select a device.
2. Right-click on the device and select Lock selection.
3. To unlock the pane, right-click on any device in the Navigation pane and clear the check box for
the Lock selection option.
Sensor Data Pane
Located in the lower-left hand corner of the interface, the Sensor Data pane displays the readings and
alert status of sensors associated with the selected device in the Navigation pane. If the selected device is
an output relay device, the state of the relay is displayed.
If the selected device features a large number of sensors, the sensors may be divided into sensor sets. Use
the Set drop-down list to select either a specific sensor set or All Sensors.
Action/Information Pane
Use the Action/Information pane, located on the right-hand side of the interface, to view information and
perform configuration tasks on your appliance and pods. The following views are available from the
Action/Information pane:
• Camera View: This view displays live video captured by the appliance, cameras connected to the
appliance, or IP cameras on your network that are shared through the appliance. You can listen to
an audio stream from a selected camera pod or CCTV adapter pod and transmit audio from a
microphone connected to a computer running Advanced View to a selected camera pod or CCTV
adapter pod. If relay outputs are associated with a camera pod, buttons for each switch or relay
appear on the camera image to which they correspond.
See “Output Control” on page 50.
• Alerts View: This view displays alerts and resolved alerts reported by the appliance, any pods
connected to the appliance, or any devices being monitored by scanners.
• Maps View: This view displays maps that you configure for use with the appliance. A device with
a red background has an alert status. A device with a green background has a status of OK.
• Graph View: This view displays a graph of up to 24 hours of environmental data collected from
any sensors or devices associated with an appliance.
• Configuration View: Use this view to configure your appliance, pods connected to the appliance,
and sensors, plus various other system settings and features.
• About View: This view displays information about your appliance and all connected pods.