User`s guide

127NetBotz Appliance User’s Guide
Periodic Sensor Notification can optionally include the current picture image associated with the
camera(s) on the device. If this option is enabled and the notification is an HTTP post, the Periodic
Sensor Notifications will be encoded using the multipart/form-data encoding, in the same fashion as
the Picture Alerts are encoded.
SENSORLOC_ROOMCOLUMN_n Column within room where specified sensor is located, if
different than the NetBotz device.
SENSORLOC_HEIGHTABOVEFLOOR_n Height above floor of specified sensor, if different than the
NetBotz device.
SENSORLOC_BUILDING_n Name of building containing the specified sensor, if
different than the NetBotz device.
SENSORLOC_FLOOR_n Floor number where the specified sensor is located, if
different than the NetBotz device.
SENSORLOC_COMPANY_n Company name associated with the specified sensor, if
different than the NetBotz device.
SENSORLOC_SITE_n Name of site where the specified sensor is located, if
different than the NetBotz device.
SENSORLOC_ADDRESS1_n First line of address of the location of the specified sensor,
if different than the NetBotz device.
SENSORLOC_ADDRESS2_n Second line of address of the location of the specified
sensor, if different than the NetBotz device.
SENSORLOC_CITY_n City where the specified sensor is located, if different than
the NetBotz device.
SENSORLOC_STATE_n State/province/territory where the specified sensor is
located, if different than the NetBotz device.
SENSORLOC_COUNTRY_n Country where the specified sensor is located, if different
than the NetBotz device.
PICTURE_m The binary encoding of the current image of the mth
camera of the device, where m is a zero-based index. The
filename of the attribute will be campic.jpg or
campic.png, depending on the Content-Type of the
picture. The Content-Type can be image/jpeg or image/
png. The image length is currently limited to 64K, but
may be increased in future products.
Parameter Name Parameter Definition