User`s guide

86NetBotz Appliance User’s Guide
6. Select the camera from the list of available pods, then click Share Remote Pod.
7. Click OK to close the Rack Access PX-HID & Pod Sharing Configuration window. The camera
will now appear in the Navigation pane.
Proxy
Use the Proxy icon to allow the appliance to use an HTTP, Socks V4, or V5 Proxy Server. When
configured, the appliance uses the proxy server for all e-mail and HTTP Post communications, allowing
these communications to cross the firewall. These settings apply only to communications from the
appliance.
To use an HTTP, Socks V4, or V5 Proxy Server, double-click the Proxy icon to open the Proxy Settings
window. This window contains an HTTP tab and a SOCKS tab, each of which contains the following
fields:
Enter your information and click OK to save your changes.
Field Description
Hostname The host name or IP address of the proxy server the appliance uses for
e-mail, HTTP Posts, and other outbound communications.
Port The IP port number to connect to on the proxy server.
User name Enter a User name to allow access through the server.
Password/Verify password Enter a Password to allow access through the server.