User`s guide

74NetBotz Appliance User’s Guide
IP Filter
Use the IP Filter icon to limit access to your appliance to users connecting from specified IP addresses or
IP address ranges. By default, users from any IP address can attempt to access your appliance. While
access to the appliance is granted only when valid user account names and passwords are provided, IP
Filtering provides additional security.
To specify IP Filter criteria:
1. Click Add and specify an IP address that is permitted access. You can use wildcards to specify a
range of addresses.
2. Click OK to add the address to the list of IP Filter criteria.
3. When you finish specifying IP Filter values, click OK.
Note: Do not include the IP address of the client accessing the appliance in the filtered IP list.
License Keys
Use the License Keys icon to manage license key-enabled applications available on this appliance. A list
of available applications appears in the License Keys window, indicating whether the application is
enabled or not. If a license key is applied to an available function, the license key is displayed also.
To enable a license key-based application:
1. Select the application from the License Keys list and click Edit.
2. In the License Key field, enter the License Key you received when you purchased a license for
the application, and click OK. A prompt to reboot the appliance appears.
3. Click Reboot. The appliance automatically reboots. This may take a few minutes, during which
time Advanced View will be unavailable.
To disable a license key-based application:
1. Select the application from the License Keys list and click Edit. A confirmation message
appears, asking whether you want to remove the application.
2. Click OK. A prompt to reboot the appliance appears.
3. Click Reboot. The appliance automatically reboots. This may take a few minutes, during which
time Advanced View will be unavailable.
Location
Use the Location icon to configure additional sensor-specific location information to include in alert
notifications generated by the appliance. Location values can be assigned to the appliance and to all pods
and external sensors connected to the appliance. Location settings for pods and sensors can be inherited
from their parent pods and sensors. Double-click the Location icon to open the Location Configuration
window.
To change the Location settings, select an appliance, pod, or sensor. Select the Location Data Type and
click Edit to open the Edit Location Attribute window. Enter the new Location value and click OK.
When you finish specifying Location values, click OK save your changes.