Datasheet
NetBotz U.S. Commercial Products – October 3, 2005
NETBOTZ PARTNER CONFIDENTIAL Page 7 of 13
THIRD PARTY HARDWARE PRODUCTS
NBAC0207 CAT5 Pod Extender Model 110i (1-port), includes 5m USB cable,
U.S. power supply
NBAC0208 CAT5 Pod Extender Model 410i (4-port) , includes 5m USB cable,
U.S. power supply
NBAC0212 Fiber 500-Meter Pod Extender, U.S. power supply
NBAC0210 USB 4-port Hub, Self- and bus-powered modes, U.S. power supply
NBAC0103 Universal Power Supply (for 420/320/400/310 model appliances)
NBAC0214 Camera Pod Enclosure
NBAC0215 Camera Pod Enclosure HB, requires 24VAC power supply
NBAC0216 U.S. Power Supply for Camera Pod Enclosure HB, 24 VAC
NBAC0218 Lens, wide-angle, 4.8mm, fixed objective
(For use with Camera Pod 120 and NetBotz 500 only)
NBAC0224 Day/Night CCTV Camera, U.S. power supply
International Versions:
Type C Cordset Type G Cordset Type I Cordset Type M Cordset No Cordset
CAT5 Extender Mod 110i NBAC0207-INT-C NBAC0207-INT-G NBAC0207-INT-I NBAC0207-INT-M NBAC0207-INT
CAT5 Extender Mod 410i NBAC0208-INT-C NBAC0208-INT-G NBAC0208-INT-I NBAC0208-INT-M NBAC0208-INT
Fiber 500-Meter Pod Extender NBAC0212-INT-C NBAC0212-INT-G NBAC0212-INT-I NBAC0212-INT-M NBAC0212-INT
USB 4-Port Hub NBAC0210-INT-C NBAC0210-INT-G NBAC0210-INT-I NBAC0210-INT-M NBAC0210-INT
CAT5 Pod Extender
Extends range of Camera Pod 120 or Sensor Pod 120 to 360 feet (110m) from NetBotz 500 or 420
USB cable connects into local extender which converts signal to run over UTP CAT5 cable for up to 100m
into a remote extender, which converts signal back to USB cable
Fiber 500-Meter Pod Extender
Extends range of Camera Pod 120 or Sensor Pod up to 510 meters (1,673 feet) from NetBotz 500 or 420
USB cable connects into local extender which converts signal to run over fiber optic cable for up to 500m
into a remote extender, which converts signal back to USB cable
Remote extender has integrated 4-port USB hub
Connects to MT-RJ fiber connector (duplex connection). Fiber must be 62.5/125 multimode, 50/125
multimode, or single-mode cabling
Camera Pod Enclosures
Protect Camera Pod 120s from moisture, tampering or vandalism
HB enclosure has internal heater & blower to protect Camera Pod from temperature extremes and frost
24 VAC power supply (NBAC0216) required to power heater & blower on HB enclosure
USB Right Angle Cable Adapter Kit included
Day/Night CCTV Camera
Automatically switches from color to black & white in low light conditions
Built-in infrared LEDs for illumination
4.3 mm lens, 380 lines resolution
Weather-resistant
Connects to NetBotz 500 or 420 via CCTV Adapter Pod 120
Available in U.S. & Canada only
Universal Power Supply (for 420/320/310/400 models)
Enables NetBotz appliances to be used in European countries or any country with power input voltage
between 90-264 VAC and frequency in the 50-60 Hz range (included with “-INT” versions of appliances)
Power cord and plug not included.