Datasheet
NetBotz U.S. Commercial Products – October 3, 2005
NETBOTZ PARTNER CONFIDENTIAL Page 4 of 13
Pods & External Integration Products
PRODUCT NUMBER DESCRIPTION
NBPD0121 Camera Pod 120; includes camera pod mounting bracket, 5m USB cable
NBPD0122 Sensor Pod 120; includes sensor pod mounting bracket, 5m USB cable
NBPD0129 EIP
*
4-20mA Sensor Pod, includes 5m USB cable
NBAC0231 EIP 0-5V Sensor Cable
NBDC0001 EIP Dry Contact Cable
NBPD0123 EIP CCTV Adapter Pod 120; includes 5m USB cable
NBPD0124 EIP Output Relay Pod 120, includes 5m USB cable
PODS &
EXTERNAL
INTEGRATION
PRODUCTS
NBAS0201 NetBotz 500 Extended Storage System
Camera Pod 120
Resolutions: 160x120, 320x240, 640x480, 800x600, 1024x768, 1280x1024 when connected to 500;
160x120, 320x240, 640x480 when connected to 420 models.
Frame rates: 1,2,3,4,5,8,10,15,20, 30 frames per second when connected to 500;
1,2,3,4,5,8,10 fps when connected to 420.
Lens: 8mm 35ºW by 28ºH C-mount lens with included CS adapter (field of view up to 64ºW x 53ºH,
depending on imager mode and image resolution), customer-focusable.
Lens can be replaced with any CS- or C-mount lens (C-mount lenses require adapter ring)
Internal microphone can record audio alerts – or plug in external microphone
Plug in powered speakers to play local audio alerts
Door switch sensor included
LED Indicator pulses during camera and audio capture activity
Add-on Camera Pod 120s include 360º pod mounting bracket
Sensor Pod 120
Integrated Environment Sensors: Temp, Humidity, Dew point, Airflow, Audio
4 external sensor ports
Add-on Sensor Pod 120s include fixed pod mounting bracket
EIP 4-20mA Sensor Pod
Enables NetBotz 500 & 420 to monitor 4-20mA analog sensors
Pod supports up to four 4-20mA sensors (2-,3-, or 4-wire sensors)
EIP 0-5V Sensor Cable
Enables NetBotz 500, 420, 320 to monitor 0-5V analog sensors
Cable connects to external sensor ports on Sensor Pod 120 or NetBotz 420, 320
EIP Dry Contact Cable
Used to connect external dry contact devices to NetBotz monitoring appliances. Examples are detectors
for condensation and gases, sensors for glass breakage and vibration.
EIP CCTV Adapter Pod 120
Integrate CCTV cameras with the NetBotz 500 & 420 physical threat monitoring appliances
Converts analog video source to digital image suitable for use by 500’s motion sensing, alert
customization, and other capabilities
BNC, RCA, and S-Video inputs to connect one CCTV camera; Video source format can be NTSC, PAL,
or SECAM
USB ‘B’ port to connect to NetBotz 500
Internal microphone; External jacks for microphone, speaker, door switch sensor (Door switch sensor is
not included)
EIP Output Relay Pod 120
Trip low-current relay outputs to open locks, turn on lights, or other action
16 outputs, each can be individually labeled and controlled
Supported on NetBotz 500 & 420
NetBotz 500 Extended Storage System
Extends NetBotz 500 onboard data storage to up to 6 months (or 5000 alerts) of alert data
Persistent storage - data retained if power lost
Extended Storage Software is license key enabled
60GB external USB hard drive and mounting bracket
*
EIP – External Integration Product