User manual

Network
Management Card
User Manual
Network Management Card – User Manual 34003676EN/HA Page 52/81
◗ Change Community Read-only: Text field limited to 31 characters. This field is only validated after
clicking on “Save” . Default value “public”.
◗ Current Community Read/Write is: Enables read and write SNMP access control (GET and SET).
Default value “public”.
◗ Change Community Read/Write: Text field limited to 31 characters. This field is only validated after
clicking on “Save” . Default value “public”.
◗ Change Trap Port Number: Numeric field limited to 65534. Enables forwarding of traps sent by the card to
a port other than the port usually used for SNMP. Default value 162.
◗ SSL Activation: When selected, access to Web interface is made in secure mode (https). Telnet
access is disabled and the card is accessible in SSH.
Connections with Network Shutdown Modules stay in standard mode (secure TCP)
SSL Security Implementation
SSL version 3.0
Method  TLS_RSA_WITH_RC4_128_MD5
Auth  RSA
Key Exchange  RSA
Encryption  RC4_128
Digest  MD5
SSH Security Implementation
SSH v1
Method ==> SSH_CIPHER_3DES
Encryption ==> Triple_DES in CBC mode
This change takes effect after a card reboot.
◗ Authentication for all html pages : Login/password Authentication is required for all pages.