User`s guide

®
USER’S GUIDE
Metered Rack PDU
80
Configure Links (Administration>General>Quick Links)
Select the Administration tab, General on the top menu bar, and Quick Links on the
left navigation menu to view and change the URL links displayed at the bottom left of
each page of the interface.
By default, these links access the following Web pages:
• Link 1: The home page of the APC Web site.
• Link 2: A page where you can use samples of APC Web-enabled products.
• Link 3: The home page of the APC Remote Monitoring Service.
To reconfigure any of the following, click the link name in the Display column:
• Display: The short link name displayed on each interface page.
• Name: A name that fully identifies the target or purpose of the link.
• Address: Any URL — for example, the URL of another device or server.
About the Rack PDU (Administration>General>About)
The hardware information is useful to APC Customer Support to troubleshoot problems
with the Rack PDU. The serial number and MAC address are also available on the
Rack PDU itself.
Firmware information for the Application Module and APC OS (AOS) indicates the
name, the firmware version, and the date and time each firmware module was created.
This information is also useful in troubleshooting and enables you to determine if
updated firmware is available at the APC Web site.
Management Uptime is the length of time the interface has been running continuously.