User`s guide

USER’S GUIDE

Metered Rack PDU

Changing the default temperature scale

Select the temperature scale (Fahrenheit or Celsius) in which to display all temperature

measurements in this user interface.

Reset the Interface

(Administration>General>Reset/Reboot)

Action Definition

Reboot

Management

Interface

Restarts the interface of the Rack PDU.

Reset All

Check-mark Include TCP/IP to reset all configuration values; unmark Include

TCP/IP to reset all values except TCP/IP.

Reset Only

TCP/IP settings: Set TCP/IP Configuration to DHCP & BOOTP, its default

setting, requiring that the Rack PDU receive its TCP/IP settings from a DHCP or

BOOTP server. See TCP/IP settings (Administration>Network>TCP/IP).

Event configuration: Reset all changes to event configuration, by event and by

group, to their default settings.

Rack PDU to defaults: Reset only Rack PDU settings, not network settings, to

their defaults.

Lost Environmental Communication Alarms: Clears any environmental alarms

caused by lost communication with a sensor, e.g., if a sensor is disconnected,

this setting returns the alarm status for that sensor to Normal.

1. Resetting may take up to a minute. The Rack PDU name and output voltage settings will not be

reset.