User`s guide

®
USER’S GUIDE
Metered Rack PDU
61
Configuring by group. To configure a group of events simultaneously:
1. Select the Administration tab, Notification on the top menu bar, and by
group under Event Actions on the left navigation menu.
2. Choose how to group events for configuration:
–Choose Grouped by severity, and then select all events of one or more severity
levels. You cannot change the severity of an event.
–Choose Grouped by category, and then select all events in one or more
pre-defined categories.
3. Click Next>> to move from page to page to do the following:
a. Select event actions for the group of events.
•To choose any action except Logging (the default), you must first have at least
one relevant recipient or receiver configured.
•If you choose Logging and have configured a Syslog server, select Event Log
or Syslog (or both) on the next page.
b. Select whether to leave the newly configured event action enabled for this group
of events or to disable the action.
When viewing details of an event’s configuration, you can change the
configuration, enable or disable event logging or Syslog, or disable notification
for specific e-mail recipients, trap receivers, or paging recipients, but you
cannot add or remove recipients or receivers. To add or remove recipients or
receivers, see the following:
• Identifying Syslog Servers (Logs>Syslog>servers)
• E-mail recipients (Administration>Notification>E-mail>recipients)
• Indirect Notification Through Logs or Queries
• Trap Receivers (Administration>Notification>SNMP Traps>trap receivers)