User`s guide

®
USER’S GUIDE Metered Rack PDU
33
Device Manager Menus
Device Manager Tab
The Device Manager tab contains load and outlet configurations and settings for your
Rack PDU. The Load Management menu item displays by default.
Load management
The left navigation menu option Load Management, under the Device Manager tab,
displays both the load status the Rack PDU is supporting and configurable fields to set
the Load Thresholds for the banks or phases of the Rack PDU.
The graph displays the load the Rack PDU is supporting. The graph is accompanied by
the measurement of the load in Amps. Alarms associated with the load are displayed
next to the graph.
The following alarms can be set through the Load Management menu: Overload
Alarm, Near Overload Warning, and Low Load Warning.
Outlet Current Management (High Density PDUs only)
Use the Outlet Current Management menu to specify Overload, Nearload, and
Lowload thresholds for each outlet. The outlets are listed by their phase, name and
load.
Change the outlets to the preferred load and click Apply to save changes or Cancel to
exit without saving the changes.
To configure outlet names, see Outlet Name Configuration (High
Density PDUs only).