User`s guide

®
USER’S GUIDE
Metered Rack PDU
31
Selecting a menu to perform a task
• To do the following, see Rack PDU Settings:
– Configure the overload thresholds for each phase or bank.
– Set the Name and Location of the Rack PDU.
– Set the names and associated Web links for the banks.
• To do the following, see Configuring event actions:
– Access the event log.
– Configure the actions to be taken based on the severity level of an event.
– Configure SNMP Trap Receiver settings for sending event-based traps.
– Define who receives e-mail notification and Syslog messages for events.
– Test e-mail settings.
• To do the following, see Data log (Logs>Data>options):
– Access the data log.
– Define the log interval (how often data will be sampled and recorded) for the data
log.
• To do the following, see Administration: Network Features:
– Configure new TCP/IP settings for the Rack PDU.
– Identify the Domain Name System (DNS) Server, test its network connection, and
enable or disable DNS Reverse Lookup Event Logging (which logs the domain
name of the device associated with each event).
– Define settings for FTP, Telnet, SSH, the Web interface (HTTP and HTTPS),
SNMP, and e-mail.
– Configure the Rack PDU’s Syslog message feature.