Specifications

Metered Rack Power Distribution Unit 7
Operation
Display interface
Link - Rx/Tx
10
/
100
Status
Serial Port
Reset
Press and hold
to invert display.
- Warning
- OK
- Overload





Amps
Amps


Metered Rack PDU


Line Indicator LED: Indicates normal (green), warning (yellow), and
alarm (red) conditions.

Control button: Press and hold for five seconds to view the orientation;
hold for an additional five seconds to change the orientation.

Ethernet port: Connects the PDU to your network, using a CAT5 network
cable.

Status LED: Indicates the status of the ethernet LAN connection and the
state of the
Metered PDU.
• Off–The PDU has no power.
• Solid green–The PDU has valid TCP/IP settings.
• Flashing green–The PDU does not have valid TCP/IP settings.
• Solid orange–A hardware failure has been detected in the PDU, contact
Customer Support at a phone number on the back cover of this manual.
• Flashing orange–The PDU is making BOOTP requests.

Link LED: Indicates whether there is activity on the network.

Serial port: Access internal menus by connecting this port (RJ-11 modular
port) to a serial port on your computer, using the supplied serial cable
(
940-0144).

Display of the current used by the PDU and attached devices: Shows the
aggregate current for the
PDU.

Reset switch: Resets the PDU without affecting the outlet status.