User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
89
FTP Server, and Telnet & Web options
Each of these options has a setting which enables (by default) or disables
Access, and a Port setting that identifies the TCP/IP port used for
communications with the MasterSwitch Plus. The default Port settings are
21 (FTP), 23 (Telnet), and 80 (Web interface).
To enhance the protection provided by User Name and Password settings,
change the Port setting to a unique port number from 5000 to 32767. After
this change, when you log on, you must add a colon (:) (or a space,
depending on your Telnet client) and the number of the non-default port to
the IP address used. The following examples show the FTP, Telnet, and
Web interface commands needed when the Port numbers have been
changed to 5000 for FTP, 16512 for Telnet, and 32740 for HTTP at the
MasterSwitch Plus with a System IP address of 168.612.12.114:
ftp 168.612.12.114:5000
telnet 168.612.12.114:16512
http://168.612.12.114:32740
The Telnet and Web options are combined in the Web
interface but separate in the control console.
S
ee a
l
so
To use FTP to download configuration files, see the Addendum
(.\doc\addendum.pdf) on the APC MasterSwitch Utility CD.
To use FTP to access a text version of the Name of second
commonly-named product’s event log, see How to use FTP
to retrieve log files.