User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
85
Option Settings
TCP/IP
Use this option to enable or disable BOOTP, and when BOOTP is disabled,
to define the three TCP/IP settings that the MasterSwitch Plus needs to
operate on the network.
• System IP address for the unit
• Subnet mask value
• IP address of the default gateway
When BOOTP is enabled (the default setting), you can affect only the
BOOTP setting. A BOOTP server will provide the MasterSwitch Plus with its
TCP/IP settings whenever the unit is started, reset, or restarted.
For information about the watchdog role of the default
gateway, see Resetting the network timer.
S
ee also
To use BOOTP, see the Addendum (.\doc\addendum.pdf)
provided on the APC MasterSwitch Utility CD.