User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
50
Configure Environmental Alarms
Web interface. Click the Outlet Config menu under the MasterSwitch
Plus unit you want to configure. Select the Environmental alarms to enable
or disable by selecting the checkboxes under each Enable/Disable
Environment Alarm Actions heading:
• Zones 1–4
• Probe 1
• Probe 2
Click the Apply button under each heading to accept the changes.
Control console. Select the MasterSwitch Plus unit you want to configure
from the Device Manager menu, and select the outlet you want to
configure. Select Environmental Alarms Configuration and choose a
configuration setting from the list. Select Accept Changes to apply the new
settings.
The Environmental Alarms apply only if you have an
Environmental Monitoring card installed in an expansion unit,
or if the MasterSwitch Plus is connected to an Environmental
Monitoring Unit.
Setting Definition
Zone 1 Controls the Zone 1 environmental alarm.
Zone 2 Controls the Zone 2 environmental alarm.
Zone 3 Controls the Zone 3 environmental alarm.
Zone 4 Controls the Zone 4 environmental alarm.
Probe 1
Humidity Low
Limit
Controls the humidity low limit alarm for the first temperature and
humidity probe.