User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
40
Select a menu to perform a task
To do the following, see the Outlets Menu:
• Control power to any of the individual AC outlets on the rear panel of
the unit.
• Control power to all of the AC outlets on the rear panel of the unit.
To do the following, see the MasterSwitch Plus Menus:
• Set the device name.
• Set the Power On Time Delay.
• Set outlet names and modes.
• Enable and disable environmental alarm actions.
To do the following, see Event-Related Menus:
• Access the event log.
• Configure the actions to be taken based on an event’s severity level.
• Configure SNMP Trap Receiver settings for sending event-based
traps.
• Define who will receive e-mail notifications of events.
• Test e-mail settings.
To do the following, see Network Menu:
• Configure new TCP/IP settings for the unit.
• Identify the Domain Name Service (DNS) Server and test the network
connection to that server.
• Define settings that affect FTP, Telnet, the Web interface, SNMP, and
e-mail.
To do the following, see System Menu:
• Control Administrator and Device Manager access.
• Define the system Name, Contact, and Location values.