User`s guide

®
®®
®
USER’S GUIDE masterswitch plus
27
Local access to the control console
You can use a local computer that connects to the MasterSwitch Plus
through the serial port on the front of the unit.
1. Select a serial port at the local computer, and disable any service
which uses that port.
2. Use the supplied serial cable (940-0024C) to connect the selected port
to the serial port on the front of the MasterSwitch Plus.
3. Run a terminal program (such as HyperTerminal) and configure the
selected port for 2400 bps, 8 data bits, no parity, 1 stop bit, and no flow
control. Save the changes.
4. Press
ENTER twice to display the User Name prompt.