Owners manual

79KVM Access Management Software User Manual
MAC Filtering. MAC filtering controls access to KVM ACCESS based on the MAC addresses of the
computers attempting to connect to it.
• To enable IP filtering, check the Enable IP Filter checkbox.
– If Validate MAC at KVM ACCESS login is enabled, KVM ACCESS will verify the client
PC's MAC address when the user attempts to log in. Otherwise, the MAC address will only be
verified when attempting to open a viewer.
– If the Include button is selected, all the addresses specified in the address list are allowed
access. All other addresses are denied access.
– If the Exclude button is selected, all the addresses specified in the address list are denied
access; all other addresses are allowed access.
• MAC filters can consist of a single address, or a range of addresses. You can add as many MAC
addresses as you require. Enter the addresses directly into the IP address text input box, using a
comma between the addresses. There is no space before or after the commas.
Single Sign On. If enabled, users that are authenticated through KVM ACCESS are automatically
authenticated on all the devices deployed on the system. They don't have to be authenticated on each
device individually.
Certificate
When logging in over a secure (SSL) connection, a signed certificate is used to verify that the user is
logging in to the site he intended. The Certificate page is used to create, modify, or obtain a certificate for
this purpose.
During installation, each KVM ACCESS creates its own independent, self-signed certificate based on
the installation information, similar to the one below: