Owners manual

KVM Access Management Software User Manual92
To change the parameters of the task:
1. Click on the task name on the Sidebar or in the Task List.
2. When the Schedule page opens, click Task Properties on the Panel Menu.
3. When the Task Properties page opens, make the changes and click Save.
Deleting a Task
If a task is no longer needed, put a check in the box in front of its name and click Delete at the top-right
of the panel.
Replicate Database
Select Replicate Database, to open the Schedule page. The schedule choices are similar to those for the
Backup server database task. Refer to page 84 for details.
Note: The default is for the database to automatically replicate once a day at 00:00. Use this
page to change the replication schedule. Setting the replication schedule to a too small time
interval can adversely influence system performance. If the schedule is set to a too large
interval, there can be a long time period when the databases don't match.
When the schedule choices are made, click Save.
Appliance Files
The Appliance Files menu is used to centralize firmware management and restore previously backed up
configuration files.
Firmware Files
The Appliance Files menu opens to the Firmware Files page. This page lists all the firmware upgrade
files stored on KVM ACCESS - showing the specific information about each file.
By making the latest firmware upgrade files available for distribution from this single location, upgrades
can be performed from within KVM ACCESS ensuring that all devices on your installation are operating
at the same firmware level.
Note: 1. Firmware upgrades are performed under the Tasks submenu.
2. New firmware upgrade packages are posted on the apc website (www.apc.com) as they
become available. Check the website regularly to find the latest packages and information
relating to them.