Specifications

2. When using a forklift to move the unit, use the shipping skid to protect the bottom of the unit.
When using chains, cables, or rope to lift the unit, use spreader bars to prevent damage to the
finished panels. Four threaded M10x16 holes are provided to accommodate lifting eye bolts that
can be utilized to lift the unit.
3. Exercise caution when maneuvering and transporting the cooling unit as it can tip easily.
F. CONDENSATE DRAIN ROUTING
1. ACRC301S series: Condensate from the evaporator pan is collected and discharged by the
condensate pump to a 5-mm (0.188 in.-ID) condensate line supplied with the unit.
2. ACRC500 series: Condensate from the evaporator pan is collected and discharged by the
condensate pump to a 9.5-mm (0.375-in. ID) condensate line supplied with the unit. Additional
condensate piping is required to route the condensate line to the building.
3.2 FIELD QUALITY CONTROL
A. APPLICATION OF GUIDE SPECIFICATIONS
1. Because of an ongoing program dedicated to product improvement, specifications are subject to
revisions without notice. Schneider Electric assumes no responsibility, and disclaims all liability
for damages resulting from use of this information or for any errors or omissions.