Water Dispenser User Manual

5InRow RP Technical Data Manual
Dual Position Float
Condensate Management
The pump is factory wired and piped
internally to the condensate drain pan
and humidifier outlet. The pump is
capable of pumping a maximum of
18 m (60 ft) at 0.009 l/s (8.45 GPH),
which may include a maximum lift of
3.5 m (11.5 ft) of head. A dual
position float is included with the
unit. One position is used for
condensate pump control, the other to
alarm condensate pump failure which
shuts down the RP to prevent
condensate pump overflow.
Network Management Card
Permits multi-level access to
monitoring, control, and event
notification features over the user’s
network.
Bay Kit InRow RP/
NetShelter SX
Baying kits made of 1.5 mm
(16 gauge) steel enable baying of the
cooling system to APC NetShelter
SX enclosures.
Remote Temperature
Sensors
To control the unit based on rack inlet
temperature, three remote sensors are
provided. These sensors measure at
4 m (13 ft) from the connection point
inside the RP. The sensors are used
for remote placement in the field on
adjacent IT racks.
Humidifier
The humidifier is a self-contained,
steam-generating type, factory piped
and wired, with a disposable cylinder
and an automatic solid state control
circuit. Humidifier canisters are
replaceable. The humidifier
controller communicates directly to
the microprocessor controller and
provides complete status and control
at the operator interface.