Specifications

Customizing and Updating the PDU

64 40kW InfraStruXure PDU—Operation and Configuration

6. From the Control Console menu, select System, then Tools, then File Transfer, then

XMODEM.

7. The system will prompt you with Perform transfer with XMODEM –CRC? Type Yes

and press ENTER.

8. The system will then prompt you to choose a transfer rate and to change your terminal settings

to match the transfer rate. Press

ENTER to set the PDU to accept the download.

9. In the terminal program, send the file using XMODEM protocol. Upon completion of the

transfer, the console will prompt you to restore the baud rate to normal.

The PDU network management interface will reboot when the download is complete.

Cautio

Do not interrupt the download.