Specifications

Communication Configuration
40kW InfraStruXure PDU—Operation and Configuration 51
FTP and SCP
You can use FTP (enabled by default) or Secure CoPy (SCP) to transfer new firmware to the PDU, or
to access a copy of the PDU’s event logs. SCP provides the higher security of encrypted data
transmission and is enabled automatically when you enable SSH.
To access the PDU through FTP or SCP, the default user name and password are apc and apc for an
Administrator, or device and apc for a Device Manager. In the command line, use the IP address of
the unit.
Note
If you enable SSL and SSH for their high-security authentication and encryption,
disable FTP. Allowing file transfer to the PDU through FTP compromises the high
security you implement by choosing SSL and SSH. To disable FTP, you must be an
Administrator; use the FTP Server option of the Network menu.
See als
o
See the InfraStruXure Power Distribution Unit’s online Network Management User’s
Guide to use FTP or SCP to retrieve log files from the PDU or to transfer firmware files
to the PDU.