Specifications

40kW InfraStruXure PDU—Operation and Configuration i
About This Manual
Audience
This manual is intended for end-users of a 40kW InfraStruXure PDU. It covers the operation,
configuration, and customization of the InfraStruXure PDU, and includes basic InfraStruXure system
operation.
Companion manuals
For additional information about the InfraStruXure system, see the following manuals that were
included with the PDU:
• 40kW InfraStruXure System Installation and Start-Up (990-1593A) covers the installation and
start-up of InfraStruXure UPS power distribution to the rack and power distribution within the
rack.
• Certified Electrician’s Instructions (990-1595A) provides specific instructions for the
electrician connecting mains and an Emergency Power Off (EPO) switch to the InfraStruXure
PDU.
For information about specific components in your InfraStruXure system, see the documentation
included with each component. Before installing or operating any component, refer to the safety
instructions in the component’s manual.
The illustrations of products in this manual may vary slightly from the products in your InfraStruXure
system.
How to find updates to this manual
The content in this manual is based on the latest information available at the time of publication. You
can check for updates to this manual by clicking on the User Manuals link on the Support page of
the APC Web site (www.apc.com). In the list of InfraStruXure Power Distribution Unit manuals,
look for the latest letter revision (A, B, etc.) of the part number on this manual.