Specifications

Overview
40kW InfraStruXure PDU—Operation and Configuration 9
User connection plate
For a description and location of the user connection plate, see (

) on page 6. For clarity, refer to the
following illustration which shows the user connection plate in greater detail.

Connect the InfraStruXure PDU to the network or the InfraStruXure Manager through the
ethernet port.

The user connection plate has four input contact connections for monitoring Normally
Open (NO) or Normally Closed (NC) dry contacts. See page 58 for more information.

The user connection plate has four relay output connections for connection of Normally
Open (NO) or Normally Closed (NC) dry contacts. See page 58 for more information.

Connect an Emergency Power Off (EPO) switch at one of the three choices of EPO
connections (24VDC, 24VAC, or contact closure). See page 59 for more information.
1 234
ATS EN
ATS 0
AT S 1
ATS 2
EPO
Contact
–
+
EPO 24V
AC/DC
Contact Inputs
Contact Output s
USER INTERFACE
© 2001 APC
MADE IN USA
!
!
!



