Central Server Installation Manual

InfraStruXure Central Installation Manual2
Safety
Rack-mounting safety
The InfraStruXure Central server is shipped with rack-mounting rails. Install the rails at the appropriate
position in your rack, and mount the unit. If the unit is mounted in an enclosure instead of an open rack,
the maximum ambient temperature in the enclosure should be no greater than 35°C (95°F).
• When you install equipment in the rack, make sure it does not interfere with the air flow required
for safe operation for the equipment.
• When you mount equipment in the rack, make sure you do not cause a hazardous condition
because of an uneven mechanical load.
• When you connect equipment to the supply circuit, avoid overloading the circuits, which could
jeopardize over-current protection and damage the supply wiring. See ratings on the equipment
nameplates for guidance.
• Maintain reliable earth grounding of the unit, particularly for supply connections (e.g., when
Power Distribution Units (PDUs) that are not directly connected to the branch circuit are used).
Equipment containing a battery
This equipment contains a non-replaceable lithium coin cell battery.