Installation manual

Assembling and connecting the external battery cabinet >

34020846EN/AE - Page 56

1. Installation

1.12 Assembling and connecting the external battery cabinet

Assembling the empty battery cabinet

Mounting the battery circuit-breaker kit

Mounting the shelves

Please contact our Sales department when selecting the battery circuit breaker.

Only one circuit breaker is necessary even if there are several battery cabinets.

1 - Secure the plate

2 - Secure connector XR1

3 - Secure the temperature sensor.

Assembly of the battery cabinet must be carried out by certified personnel (standard EN 50091-1-2).

The minimum clearance between the top of the battery cells and the next shelf is 150 mm.

1 - Secure the corner supports (6 screws per

support).

2 - Install the shelf

3 - Secure the shelf with two screws in each

corner.