Installation manual

Coupling the 400 mm auxiliary cabinet >
34020846EN/AE - Page 55
1. Installation
1.11 Coupling the 400 mm auxiliary cabinet
1 - Remove the two inter-cabinet
uprights located behind the 400 mm
cabinet.
2 - Refit the rear panel on the 400
cabinet with the supplied screws
3 - Remove the side panel on the 400
mm cabinet
4 - Unscrew the side panel of the cabinet
to be coupled without removing it
5 - Place the three inter-cabinet uprights
above the side panel of the cabinet to be
coupled
6 - Place the screws on the 400 mm
cabinet
7 - Couple the 400 mm cabinet with the
cabinet to be coupled and tighten the
screws from inside the 400 mm cabinet.
1
3
2
4
5
6
7