Datasheet

Network Shutdown Module V3
User guide
Network Shutdown Module V3 – User Manual Page 33/53
7.5.2 Customized installation package
After having customized the Network Shutdown Module
configuration (name or IP address of Network
Management Card, events and actions, etc.), you can build a Network Shutdown Module installation package
which contains your specific configuration.
You can then deploy this Network Shutdown Module configuration on other machines which have the same
operating system.
Note: Specific configuration include the UPS(s) IP address(es), the event and action, … but not the install
path or install mode.
Please proceed as follows to build the customized package (Windows or Linux):
Build customized package
• In the Package section, click on the Build customized package button to build a customized package.
• From the dialog box, then click on "OK".
• A confirmation message is displayed when the package is built. You will find in this message the path and
the name of the new package.
• Copy this package to the other machines in your chosen directory.
Note that the Customized installation package will be installed in default installation directory.
> Windows default value is C:\Program Files\...\NetworkShutdownModule
> Linux default value is /usr/local/…/NetworkShutdownModule
• Execute the package (standard installation or Silent installation).
Important:
• If you install a “customized package” on a computer where a “previous version” of Network Shutdown
Module is running:
=> The software version will be upgraded but the configuration of the “previous version” will be kept.
In order to replace a previous installation, you must first uninstall it.