Datasheet

Network Shutdown Module V3
User guide
Network Shutdown Module V3 – User Manual Page 11/53
2.3 Quick Start
To install the Network Shutdown Module in 5 minutes, please perform the following steps on a machine
running Windows 2000 / XP / 2003 / 2008 / Vista / 7 or Linux:
• Step 1 (Pre-requisites)
Check that following connections are operational:
> the electrical connection between the UPS and the server to protect
> the network connection between the UPS and the Network Management Card.
• Step 2 (Optional) and only for Windows Vista, XP with SP 2 or Windows 2003 with SP 1
To enable the configuration and supervision remote access, Network Shutdown Module needs the 4679
and 4680 ports to be opened in the Windows Firewall.
• Step 3 (Software Installation)
On a Windows or Linux machine, execute the “Network Shutdown Module” package under an
administrator account.
• Step 4 (Configuration)
> In the Configuration->Power devices screen,
Enter the default Login «MGEUPS» and default Password «MGEUPS»
Then click on the Add button and
Enter the hostname or the IP address of the Network Management Card.
Save your configuration
> In the Configuration->Users window configure your password
(recommended)
> For the multi-UPS configurations, please refer to chapter 6
• Step 5 (Operation)
You can now supervise the UPS state and the information concerning the protected server