Owners manual

63Rack Power Filter: Administration: Network Features
Ping Response
Path: Administration > Network > Ping Response
Select the Enable check box for IPv4 Ping Response to allow the Network Management Card to
respond to network pings. Clear the check box to disable an NMC response. This does not apply to IPv6.
Port Speed
Path: Administration > Network > Port Speed
The Port Speed setting defines the communication speed of the TCP/IP port.
• For Auto-negotiation (the default), Ethernet devices negotiate to transmit at the highest possible
speed, but if the supported speeds of two devices are unmatched, the slower speed is used.
• Alternatively, you can choose 10 Mbps or 100 Mbps, each with the option of half-duplex
(communication in only one direction at a time) or full-duplex (communication in both directions
on the same channel simultaneously).