Owners manual

57Rack Power Filter: Administration: Security
RADIUS
Path: Administration > Security > Remote Users > RADIUS
Use this option to do the following:
• List the RADIUS servers (a maximum of two) available to the Rack Power Filter and the time-out
period for each.
• Click on a link, and configure the parameters for authentication by a new RADIUS server.
• Click a listed RADIUS server to display and modify its parameters.
RADIUS Setting Definition
RADIUS Server The server name or IP address (IPv4 or IPv6) of the RADIUS server. Click on a
link to configure the server.
Note:RADIUS servers use port 1812 by default to authenticate users. To use a
different port, add a colon followed by the new port number to the end of the
RADIUS server name or IP address.
Secret The shared secret between the RADIUS server and the Rack Power Filter.
Timeout The time in seconds that the Rack Power Filter waits for a response from the
RADIUS server.
Test Settings Enter the Administrator user name and password to test the RADIUS server path
that you have configured.
Skip Test and Apply Do not test the RADIUS server path.