Owners manual

55Rack Power Filter: Administration: Security
Administration: Security
Local Users
Setting user access
Path: Administration > Security > Local Users > options
The Administrator user account always has access to the Rack Power Filter.
The Device User accounts are enabled by default. To disable the Device User or Read-Only User
accounts, select the user account from the left navigation menu, then clear the Enable checkbox.
You set the case-sensitive user name and password for each account type in the same manner. Maximum
length is 64 characters for a user name and 64 characters for a password. Blank passwords (passwords
with no characters) are not allowed.
For information on the permissions granted to each account type (Administrator, Device
User, and Read-Only User), see “Types of User Accounts” on page 2.
Account Type Default User Name
Default Password Permitted Access
Administrator apc apc Web interface and command
line interface
Device User device apc
Read-Only User readonly apc Web interface only