Owners manual

Rack Power Filter: 44
Configuring your device settings
Path: Configuration and Control > Configuration > device
For the Input Cutoff Setting field:
• the high-voltage threshold range is from 132 to 140
• the low-voltage threshold range is from 92 to 100
Configuring the Power-Saving Feature
The range of the Master Power-On threshold is from 10 to 85.
The Master Power-Off threshold should be Master Power-On threshold minus 5. For example, if the
Master Power-On threshold is 15 V, and the Master Power-Off threshold should be 10 V.
Steps to enable or disable the Power-Saving Feature:
1. From the Configuration and Control tab, select Configuration and device.
2. Select the Enable check box or clear it to enable or disable the power saving feature
3. Click the Apply button to make the setting effective
Steps to configure the Power-Saving threshold:
1. From the Configuration and Control tab, select Configuration and device.
2. Select the Watts [10 to 85] radio button, and then input the threshold. Alternatively, select the
Smart Power Tracking radio button
3. Click the Apply button.
Configuring the Utility Rate
The input range of utility rate is from 1 to 254: no decimals are accepted.
Steps to configure the Utility Rate:
1. From the Configuration and Control tab, select Configuration and device.
2. Input your utility rate in the box.
3. Click the Apply button.
Configuring your Contact Information
The maximum length of company, contact name, website, and phone is 16. Any special characters like as
“<”, “>” are not accepted.
Steps to configure the contact information:
1. From the Configuration and Control tab, select Configuration and device.
2. Input your company name, contact name, website, and phone in the corresponding input boxes
3. Click the Apply button.